6.4V pack
For small garden and compact all-in-one lights
- Chemistry
- LiFePO4
- Capacity
- 10Ah to 30Ah
- Typical lamp
- 5W to 20W
- Protection
- Built-in BMS
Lithium batteries for solar street lights
Enlitso LiFePO4 batteries replace short-lived lead-acid packs in solar street lights. Built with our own BMS and tested in seven stages at our Okhla, Delhi plant.
LiFePO4
Safest lithium chemistry for outdoor use
Own BMS
Designed in-house for solar charging
7 stages
Of cell and pack testing
Custom sizes
Made to fit your lamp housing
Lead-acid batteries are the most common reason a solar street light fails early. They lose capacity in heat, need replacing every few years, and add weight to the pole. Lithium fixes all three.
| Feature | Enlitso lithium (LiFePO4) | Lead-acid |
|---|---|---|
| Charge cycles | Several times more cycles | Lower, wears out sooner |
| Weight | Much lighter | Heavy |
| Usable capacity | Can use most of rated capacity | Only about half without damage |
| Heat tolerance | Stable in Indian summers | Ages fast in heat |
| Maintenance | None | Topping up, terminal cleaning |
| Cost over 5 years | Lower, fewer replacements and site visits | Higher, repeated replacement |
Standard packs for common lamp wattages. Need a different size? We build to your voltage, capacity and housing.
For small garden and compact all-in-one lights
For standard 30W to 60W street lights
For high-power highway and area lighting
Solar charging is uneven. Clouds, monsoon days and long nights stress a battery in ways a plug-in charger never does. Our BMS is designed for it.
Three steps, or send us your lamp details and we will do the sizing for you.
1
Multiply lamp watts by hours of use per night. Example: 40W x 10 hours = 400Wh.
2
Multiply by 2 or 3 days so the light still runs through cloudy weather. Example: 400Wh x 3 = 1200Wh.
3
Divide Wh by battery voltage. Example: 1200Wh / 12.8V is about 94Ah. Add a small margin for losses.
Village roads, colonies and public parks.
High-wattage lamps with long run time.
Factories, schools, hospitals and warehouses.
Supply packs for your all-in-one and split designs.
Every cell is inspected, measured, cycled, stressed and graded at our in-house lab in Okhla, Delhi. Our quality system is ISO 9001:2015.
1. Visual inspection
Swelling, leaks, dents, cracks.
2. Voltage and resistance
Cells sorted into matched batches.
3. Capacity and self-discharge
Checked against rated specs.
4. Cycling at different C-rates
Repeated charge and discharge.
5. Environmental stress
Heat, humidity, vibration, shock.
6. Safety and fault tests
Overcharge, short-circuit, impact.
7. Final grading and approval
Each cell is approved, retested or rejected based on all the data.
Usually yes, but the solar charge controller must support lithium (LiFePO4) charging. Share your controller model and we will confirm compatibility, or supply a matching controller.
We recommend LiFePO4 for street lights. It is thermally stable, safe outdoors and gives a long cycle life.
Yes. Tell us the voltage, capacity and available space, and our engineers will recommend a pack and build it to fit.
Yes. We manufacture in Delhi, so we can plan volumes, delivery schedules and documentation for projects. Call or email us with your quantity.
Life depends on depth of discharge, temperature and charging. Ask us for the cycle-life data and warranty terms for your chosen pack.
No watering or terminal cleaning. The sealed pack and BMS manage themselves.
Send your voltage, capacity, quantity and housing size. Our engineers will reply with a recommendation and a quote.